The newer generation of communicators can communicate over GSM as well as Wi-Fi for improved speed and reliability.
If your communicator supports Wi-Fi, you will receive a banner the first time you open your panel home screen. Start Wi-Fi setup by tapping 'Set Up Wi-Fi'.
Please note that only 2.4Ghz networks are supported, and only DHCP IP assignment is supported.
Once setup has been initialised, continue by tapping 'Set Up Wi-Fi'.
Choose the Wi-Fi network that you would like to connect to. Note that only 2.4 GHz networks are supported.
Next, enter the password for the selected Wi-Fi network and tap 'Connect'.
Your communicator will now attempt to connect to the Wi-Fi network using the supplied details. Congratulations, your communicator is now connected over Wi-Fi.
To update Wi-Fi settings, open the Wi-Fi Setting sub-menu on the Panel Settings screen and tap 'Open Wi-Fi Settings.
Tap Change Network, and then follow the steps outlined above to update your Wi-Fi configuration
Advanced setup: If you need to determine your communicator's MAC address, please look it up in your router's DHCP client list.